DJI O4 Air Unit Pro

Description

DJI O4 Air Unit Pro

DJI O4 Air Unit

The DJI O4 Air Unit Pro elevates FPV flight experiences with its superior imaging capabilities and extended transmission range. Equipped with a 1/1.3-inch image sensor, it records stunning 4K/120fps video and supports a 155° ultra-wide FOV, capturing immersive visuals with exceptional detail.

The dual-antenna design ensures a robust connection with a maximum range of up to 15 km, while ultra-low latency of 15 milliseconds provides real-time responsiveness, making it the premier choice for professional FPV pilots seeking top-tier performance.

Specifications:

DJI O4 Air Drone Unit Pro

• Poids : Approximately 32 grams
• Image Sensor: 1/1.3-inch CMOS
• Video Resolution: Up to 4K at 120 frames per second
• Field of View (FOV): 155° ultra-wide
• Color Mode: 10-bit D-Log M
• Video Transmission Resolution: 1080p at 100fps
• Latency: As low as 15 milliseconds
• Maximum Transmission Distance: Up to 15 kilometers
• Internal Storage: 4GB built-in, expandable via microSD card
• Antenna Design: Dual-antenna
• Mounting Hole Distance: 33.5 × 33.5 mm
• Height: 13 mm
• Cooling System: Improved cooling capabilities with ground low-power mode
• Standby Time (Ground Low-Power Mode Enabled): Up to 2.5 minutes
• Power Input: Supports 2-6S LiPo batteries (7.4V – 26.4V)
• Video Encoding: H.265
• Maximum Video Transmission Bitrate: 60 Mbps
• Racing Mode: Supports up to eight aircraft racing simultaneously with video transmission latency as low as 15 milliseconds
• Canvas Mode: Supports Betaflight OSD settings for customizable on-screen display
• Operating Temperature Range: -10°C to 40°C
• Storage Temperature Range: -20°C to 60°C
• Supported Video Formats: MP4 (H.264/MPEG-4 AVC)
• Firmware Upgrades: Supports firmware upgrades via DJI Assistant 2 (DJI FPV Series)
• App Compatibility: Compatible with DJI Fly app for settings adjustment and live view
• Warranty: 1-year limited warranty

Compatibility:

DJI O4 Air Unit Pro cpu

• Goggles: Compatible with DJI Goggles 2, DJI Goggles Integra, DJI Goggles 3, and DJI Goggles N3.
• Remote Controllers: Supports DJI FPV Remote Controller 2 and DJI FPV Remote Controller 3.
• Drone Frames: Suitable for drone frames of 3 inches and above, supporting flexible assembly for various creative flight scenarios.
• Flight Controllers: Compatible with flight controllers that support Canvas mode and Betaflight OSD settings.
• Third-Party Remote Controllers: Supports third-party remote controllers with other protocols; an additional receiver is required.
• Flight Control Protocol: To use the DJI FPV Remote Controller, the flight control protocol must be set to SBUS.
• Analog Video Transmission Systems: When used with other racing drones that use analog video transmission, it is recommended to keep the goggles at least one meter apart and manually select the distribution frequency and adjust the appropriate video transmission power.
• Accessory Compatibility: Shares partial accessory compatibility with the DJI O3 Air Unit; please check the accessory compatibility list before purchasing.
• Software Compatibility: Compatible with Gyroflow software for offline post-stabilization.
• ND Filter Compatibility: The DJI O4 Air Unit Pro Camera Module can be used with the DJI Avata 2 ND Filter Set (ND8/16/32).
• Regulatory Compliance: Complies with FCC, CE, and SRRC standards.
• Note: Third-party flight goggles are not supported.

Package Includes:

• DJI O4 Air Unit Pro
• Camera Module
• Two Antennas
• 3-in-1 Cable
• Mounting Hardware
• User Manual